Name: Rokopol vTec 8888 (Polyether polyol)
Brand: Rokopol® vTec
Availability: InStock

Individual inquiries

Reveal e-mail

Reveal phone number

Download

Catalog Inventory status General terms of sale

Certificates

ISO 14001

ISO 50001

ISO 9001

ISO 45001

See other variations of this product

Rokopol® vTec 8888 is a polyether polyol. It exists as a homogeneous liquid free of mechanical impurities. It contains antioxidants (excluding BHT). It is characterised by high purity and low emission. It has hydroxyl value within the range of 120-140 mgKOH/g, and dynamic viscosity within the range of 300-600 mPas at temp. 25°C.

Rokopol® vTec 8888 is used for production of viscoelastic polyurethane foams using the continuous system (slabstock) and for periodic production (batch). Applied together with appropriately selected additives (catalysts, silicones, foaming agents) it is used to produce blocks of viscoelastic foam with rectangular cross-section and height up to 70 cm. Main advantages of application of Rokopol® vTec 8888:

one solution for VE TDI & VE MDI,

possibility to obtain open-cell foam on standard silicone,

high purity and low VOC and FOG emission,

possibility to manufacture foams of density within the range of 30-70 kg/m3 and hardness within the range of 1-3kPa,

tear resistance of the foam is above 50kPa and relative elongation at rupture above 60%,

foam recovery time 1-10 s,

insignificant influence of temperature changes between 5-40°C on foam hardness,

hardness increase at temperature 5°C below 50% (as compared to hardness at temperature 23°C),

possibility to manufacture closed- or open-cell foams,

excellent parameters of permanent deformation enabling high foam compression during transport.

Most popular applications of Rokopol® vTec 8888:

polyurethane viscoelastic foams (visco, Memory Foam), flexible and gel foams,

increased comfort mattresses and pillows.

Properties and applications

one solution for VE TDI & VE MDI,
possibility to obtain open-cell foam on standard silicone,
high purity and low emission,
possibility to obtain viscoelastic foams with a wide range of density and hardness,
increased comfort factor of obtained foams,
insignificant influence of temperature changes between 5-40°C on foam hardness,
excellent parameters of permanent deformation enable high foam compression during transport,
used widely in furniture sector, in particular for production of mattresses and pillows with increased softness,
used for production of viscoelastic foams, polyurethane foams, flexible foams and gel foams.

Manufacturer: PCC Rokita SA

PCC Rokita SA is one of the largest chemical companies in Poland as well as Central and Eastern Europe. Its activity includes the production of chloroalkali, polyether polyols, polyalkylene glycols and phosphorus derivatives.

See products

PCC Group

Rokopol® vTec 8888 (Polyether polyol)

Manufacturer: PCC Rokita SA

Recently viewed products

Similar products

See also