Crossin® Attic Soft - Spray thermal insulation

The system is foamed with carbon dioxide (CO2) produced in the reaction of component A and component B. As a result of the combination and thorough mixing of both components, semi-rigid foam (otherwise known as soft) is obtained. It is recommended to process the system only with professional high-pressure foaming units equipped with a foaming head. This product is a unique system designed for the production of thermal insulation with acoustic properties (sound absorption class D), applied inside both residential, commercial, as well as industrial and agricultural buildings. The foamed system is characterised by increased flammability parameters (reaction to fire class: E) and stable and invariable physico-mechanical parameters.

Spraying should be carried out in such a way that the obtained layers are as thick as possible (> 100 mm). Total insulation thickness should not exceed 300 mm and 5 passes in order to obtain it. The appropriate thickness of the insulating layer ensures jointless surface of the roof, attic or ceiling, which significantly improves the energy efficiency of the entire building. Keep in mind that you must not exceed the recommended thickness of the total insulation and that the sprayed foam should not be exposed to direct UV (sunlight) or moisture. In such situations, insulation should be additionally protected, e.g. by painting it with at least two layers of protective paint (in accordance with the manufacturer's recommendations), or, if necessary, securing it with suitable waterproofing.

Crossin^® Attic Soft was introduced for sale on the basis of the Regulation on construction products CPR No. 305/2011 together with the assessment of performance carried out by the Building Research Institute (ITB) in accordance with the European harmonized standard PN-EN 14315-1. The product has a hygienic certificate PZH, as well as CE marking confirmed by the Declaration of Performance issued for this product.

Main application advantages of the product:

• Applicable directly onto the insulated surface made of most commercially available construction materials;
• Internal thermal and acoustic insulation with a wide application range (both in modernized and newly erected buildings);
• Light insulation gives the possibility to choose an individual insulation thickness without overloading the building structure;
• Insulation characterized by low heat transfer coefficient, which allows the thickness of insulating material to be reduced even by half, compared to the classic insulation materials;
• Insulation of hard-to-reach places, especially slants and gaps in the case of attic insulation, with full insulation tightness guarantee;
• The speed of execution and versatile technique of applying insulation, which give the possibility of making the entire insulation even in one day - the outer layer dries in about 13 seconds;
• Thermal and acoustic insulation with good resistance to moisture and wind thanks to Bio Defence Technology additionally protects the insulated building against mould and fungi;

Mechanical properties of polyurethane foam made with the Crossin^® Attic Soft system:

• Apparent density of core: ≥ 7 kg/m3
• Classification of the reaction to fire performance: E; Bs1d03
• Short-term water absorption by partial immersion, WP ≤ 0,85 kg/m2
• Coefficient of thermal conductivity:
  • λ_{mean, i}: 0,036 W/(m·K)
  • λ_{90, 90}: 0,037 W/(m·K)
• Declared value, λ_D for thickness: 0,037 W/(m·K)
• High mechanical strength, compressive strength: σ10 ≥ 6 kPa
• Coefficient of water vapor diffusion resistance: μ 3
• Single-number sound absorption rating: αW = 0,50
• Sound absorption class: D
• Temperature stability:
  • 70°C, 90% RH, over 48h: l ≤ 4%, w ≤ 4%, t ≤ 1%
  • -30°C, over 48h: l ≤ 2%, w ≤ 2%, t ≤ 0,5%
• Adhesion of the foam, perpendicular to the ground/tensile strength: ≥ 20 kPa
• The content of closed cells: ≤ 10%
• Resistance to mould fungi according to PN-EN ISO 846: 2002:
  • Method A: 0 - no growth

In order for polyurethane insulation to retain all properties over time, it is important to clean the insulated surface before spraying. It is also worth protecting the room and the immediate surroundings from possible dirt.